Vol. 5 No. 3 (2017)

Vol 5, No 3 (2017)

DOI: https://doi.org/10.21533/pen.v5.i1
Published: 2017-12-30

Articles

  • Effects of Cooling Rate on Strength and Microstructure of Powder Metallurgy Superalloys

    Gokhan Yıldız, Ali Gursel, Enes Akca
    DOI: https://doi.org/10.21533/pen.v5.i3.1801

  • Modeling and Simulation of the Resistance of Bacteria toAntibiotics

    Cenab Batu Bora, Sevcan Emek, Vedat Evren, Şebnem Bora
    DOI: https://doi.org/10.21533/pen.v5.i3.2039

  • Design of Experiments Application, Concepts, Examples: State of the Art

    Benjamin Duraković
    DOI: https://doi.org/10.21533/pen.v5.i3.1802

  • Application of Monte Carlo simulation and PERT/CPM techniques in planning of construction projects: A Case Study

    Mertcan Karabulu
    DOI: https://doi.org/10.21533/pen.v5.i3.2038

  • An Investigation on Deformation Behaviors of Energy Absorbers for Passenger Coaches

    Ramazan Özmen, Mustafa Günay
    DOI: https://doi.org/10.21533/pen.v5.i3.2041

  • Solving constrained optimization problems with sine-cosine algorithm

    Simge Ekiz, Pakize Erdoğmuş, Büşra Özgür
    DOI: https://doi.org/10.21533/pen.v5.i3.2042

  • Determination of appropriate axial vibration dampers for a naval vessel driven by CODAG propulsion

    Abdullah Gokturk, Osman Azmi Ozsoysal
    DOI: https://doi.org/10.21533/pen.v5.i3.2044

  • Autonomous Car Parking System with Various Trajectories

    Bunyamin Esiyok, Anil Can Turkmen, Ozgur Kaplan, Cenk Celik
    DOI: https://doi.org/10.21533/pen.v5.i3.2045

  • Kinetic study of the thermal decomposition for mixed municipal solid waste using thermogravimetric analysis

    Nzioka Antony Mutua, Alunda Benard Ouma, Odero Shirley Atieno
    DOI: https://doi.org/10.21533/pen.v5.i3.2046

  • Combined Natural Convection and Thermal Radiation in an Inclined Cubical Cavity with a Rectangular Pins Attached to Its Active Wall

    Z. Sert, M. Tekkalmaz, C. Timuralp
    DOI: https://doi.org/10.21533/pen.v5.i3.2048

  • Charpy Impact Response of Glass Fiber Reinforced Composite with Nano Graphene Enhanced Epoxy

    DOI: https://doi.org/10.21533/pen.v5.i3.2049

  • Performance comparisons of current metaheuristic algorithms on unconstrained optimization problems

    Umit Can
    DOI: https://doi.org/10.21533/pen.v5.i3.2050

  • Numerical modelling of the in-plane loaded homogenized masonry walls

    DOI: https://doi.org/10.21533/pen.v5.i3.2051

  • Condition monitoring of the uncoated carbide cutting tool in turning process of the aluminum alloy 6061 via vibration

    DOI: https://doi.org/10.21533/pen.v5.i3.2053

  • A scrutiny study on wave energy potential and policy in Turkey

    DOI: https://doi.org/10.21533/pen.v5.i3.2054

  • Estimation of Projection Matrices from a Sparse Set of Feature Points for 3D Tree Reconstruction from Multiple Images

    DOI: https://doi.org/10.21533/pen.v5.i3.2055

  • Multi-Objective Artificial Bee Colony Algorithm to Estimate Transformer Equivalent Circuit Parameters

    DOI: https://doi.org/10.21533/pen.v5.i3.2056

  • A Structured Selection Process for Small and Medium Enterprises in Construction Industry: Case of International Projects

    DOI: https://doi.org/10.21533/pen.v5.i3.2057

  • Controlling the Building Model Using High Order Sliding Mode Control Optimized by Multi Objective Genetic Algorithm

    DOI: https://doi.org/10.21533/pen.v5.i3.2058

  • A high resolution DDFS design on VHDL using Bipartite Table Method

    DOI: https://doi.org/10.21533/pen.v5.i3.2059

  • The Effects of Nanosilica on Charpy Impact Behavior of Glass/Epoxy Fiber Reinforced Composite Laminates

    DOI: https://doi.org/10.21533/pen.v5.i3.2060