Design for Additive Manufacturing: Benefits, Trends and Challenges

Benjamin Durakovic

Abstract


In past five years, there has been a rapid increase in the publication on additive manufacturing (AM). Many technologies have been introduced in a rapidly growing market. The designers are confronted with many challenges in designing products for additive manufacturing. AM offers significant advantages, but there are also many constraints for AM to be used in its full potential. This paper explores trends, issues and challenges in design for AM, including associated costs, design options, quality considerations. It has been found that AM is in its infancy, there is insufficient understanding of the process, method, strategies, tools applied in design for additive manufacturing process, while process quality and capabilities are continuously improving

Keywords


Design for additive manufacturing; DFAM; AM cost and complexity; Process quality; DFAM method

Full Text:

PDF

References


D. Bourell, J. P. Kruth, M. Leu, G. Levy, D. Rosen, A. M. Beese and A. Clare, "Materials for additive manufacturing," CIRP Annals - Manufacturing Technology, 2017.

W. E. Frazier, Metal additive manufacturing: A review, 2014.

N. Guo and M. C. Leu, Additive manufacturing: Technology, applications and research needs, 2013.

I. Gibson, D. W. Rosen and B. Stucker, Additive manufacturing technologies: Rapid prototyping to direct digital manufacturing, 2010.

Ian Gibson • David Rosen Brent Stucker, Additive Manufacturing Technologies, 2015.

J. P. Kruth, M. C. Leu and T. Nakagawa, "Progress in additive manufacturing and rapid prototyping," CIRP Annals - Manufacturing Technology, 1998.

D. W. Rosen, "Design for additive manufacturing: a method to explore unexplored regions of the design space," in 18th Annual Solid Freeform Fabrication Symposium, 2007.

B. Durakovic and M. Torlak, "Experimental and numerical study of a PCM window model as a thermal energy storage unit," International Journal of Low-Carbon Technologies, vol. 12, no. 3, p. 272–280, 2017.

B. Durakovic and S. Mesetovic, "Thermal performances of glazed energy storage systems with various storage materials: An experimental study," Sustainable Cities and Society, vol. 45, no. Feb, pp. 422-430, 2019.

B. Durakovic and M. Torlak, "Simulation and experimental validation of phase change material and water used as heat storage medium in window applications," J. of Mater. and Environ. Sci., vol. 8, no. 5, pp. 1837-1746, 2017.

B. Durakovic, H. Bašić and H. Muhič, "The Interrelationships between quality managment practicies and their effects on innovation," in Trends in the Development of Machinery and Associated Technology, Budapest, 2014.

B. Duraković and H. Bašić, "Textile Cutting Process Optimization Model Based On Six Sigma Methodology In A Medium-Sized Company," Journal of Trends in the Development of Machinery and Associated Technology, vol. 16, no. 1, pp. 107-110, 2012.

H. Bašić, B. Duraković and A. Softić, "Six Sigma Model Testing In Optimizing Medium-Sized Company Production Process," Journal of Trends in the Development of Machinery and Associated Technology, vol. 16, no. 1, pp. 103-106, 2012.

B. Durakovic, R. Demir, K. Abat and C. Emek, "Lean Manufacturing: Trends and Implementation Issues," Periodical of Engineering and Natural Sciences, vol. 6, no. 1, pp. 130-143, 2018.

B. Duraković and H. Bašić, "Continuous Quality Improvement in Textile Processing by Statistical Process Control Tools: A Case Study of Medium-Sized Company," Periodicals of Engineering and Natural Sciences, vol. 1, no. 1, pp. 36-46, 2013.

B. Durakovic, "Design of Experiments Application, Concepts, Examples: State of the Art," Periodicals of Engineering and Natural Scinces, vol. 5, no. 3, p. 421‒439, 2017.

O. Kerbrat, P. Mognol and J. Y. Hascoët, "A new DFM approach to combine machining and additive manufacturing," Computers in Industry, 2011.

G. Boothroyd, "Product design for manufacture and assembly," Computer-Aided Design, 1994.

T. C. Kuo, S. H. Huang and H. C. Zhang, "Design for manufacture and design for 'X': Concepts, applications, and perspectives," Computers and Industrial Engineering, 2001.

G. D. P. A. K. W. Boothroyd, Product Design for Manufacture and Assembly(2nd edition), New York: Marcel Dekker., 2002.

C. Poli, "Design for Manufacturing: A Structured Approach," Mechanical and Industrial Engineering Department University of Massachusetts Amherst, 2001.

G. Boothroyd, Assembly Automation and Product Design, New York: Taylor and Francis, 2005.

C. Chu, G. Graf and D. W. Rosen, "Design for additive manufacturing of cellular structures," Computer-Aided Design and Applications, 2008.

D. E. Cooper, M. Stanford, K. A. Kibble and G. J. Gibbons, "Additive Manufacturing for product improvement at Red Bull Technology," Materials and Design, 2012.

Y. Huang, M. C. Leu, J. Mazumder and A. Donmez, "Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations," Journal of Manufacturing Science and Engineering, 2015.

R. Ponche, O. Kerbrat, P. Mognol and J. Y. Hascoet, "A novel methodology of design for Additive Manufacturing applied to Additive Laser Manufacturing process," Robotics and Computer-Integrated Manufacturing, 2014.

R. Ponche, J. Y. Hascoet, O. Kerbrat and P. Mognol, "A new global approach to design for additive manufacturing," in Additive Manufacturing Handbook: Product Development for the Defense Industry, 2017.

B. Vayre, F. Vignat and F. Villeneuve, "Identification on some design key parameters for additive manufacturing: Application on Electron Beam Melting," in Procedia CIRP, 2013.

N. Hopkinson, R. Hague and P. Dickens, Rapid Manufacturing An Industrial Revolution for the Digital Age, 2006.

E. Atzeni and A. Salmi, "Economics of additive manufacturing for end-usable metal parts," International Journal of Advanced Manufacturing Technology, 2012.

C. C. Seepersad, "Challenges and Opportunities in Design for Additive Manufacturing," 3D Printing and Additive Manufacturing, 2014.

W. C. C. T. Ivanova O, "Additive manufacturing (AM) and nanotechnologypromises and challenges," Rapid Prototyp J , vol. 19, no. 5, p. 353–64, 2013.

"Scopus," 2018. [Online]. Available: www.scopus.com. [Accessed May 2018].

M. K. Thompson, G. Moroni, T. Vaneker, G. Fadel, R. I. Campbell, I. Gibson, A. Bernard, J. Schulz, P. Graf, B. Ahuja and F. Martina, "Design for Additive Manufacturing: Trends, opportunities, considerations, and constraints," CIRP Annals - Manufacturing Technology, 2016.

M. P. Caputo, A. E. Berkowitz, A. Armstrong, P. Müllner and C. V. Solomon, "4D printing of net shape parts made from Ni-Mn-Ga magnetic shape-memory alloys," Additive Manufacturing, 2018.

I.Yadroitsev, I.Shishkovsky, P.Bertrand and I.Smurova, "Manufacturing of fine-structured 3D porous filter elements by selective laser melting Author links open overlay panel," Applied Surface Science, vol. 255, no. 10, pp. 5523-5527, 2009.

D. R. B. S. I. Gibson, Additive manufacturing technologies: 3D printing, rapid prototyping, and direct digital manufacturing, New York: Springer, 2014.

I.Yadroitsev, L. Thivillon, Ph.Bertrand and I.Smurov, "Applied Surface Science Strategy of manufacturing components with designed internal structure by selective laser melting of metallic powder Author links open overlay panel," Applied Surface Science, vol. 254, no. 4, pp. 980-983, 2007.

A. Bandyopadhyay and B. Heer, Additive manufacturing of multi-material structures, 2018.

A. Levy, A. Miriyev, A. Elliott, S. S. Babu and N. Frage, "Additive manufacturing of complex-shaped graded TiC/steel composites," Materials and Design, 2017.

P. Muller, P. Mognol and J. Y. Hascoet, "Modeling and control of a direct laser powder deposition process for Functionally Graded Materials (FGM) parts manufacturing," Journal of Materials Processing Technology, 2013.

J. Chu, S. Engelbrecht, G. Graf and D. W. Rosen, "A comparison of synthesis methods for cellular structures with application to additive manufacturing," Rapid Prototyping Journal, 2010.

B. B., "3-D printing: the new industrial revolution," Bus Horiz, vol. 55, no. 2, pp. 155-62, 2012.

G. A. Adam and D. Zimmer, "Design for Additive Manufacturing-Element transitions and aggregated structures," CIRP Journal of Manufacturing Science and Technology, 2014.

A. du Plessis, P. Sperling, A. Beerlink, W. B. du Preez and S. G. le Roux, "Standard method for microCT-based additive manufacturing quality control 4: Metal powder analysis," MethodsX , vol. 5, pp. 1336-1345, 2018.

Frost & Sullivan's Global 360° Research Team, "Global Additive Manufacturing Market, Forecast to 2025," Frost & Sullivan, 2016.

E. GmbH, "ASS Maschinenbau – Additively Manufactured Robotic Hand for Pharmaceutical Supplier Theo Hillers GmbH," [Online]. Available: https://cdn0.scrvt.com/eos/public/f31a95f72c2b78d0/d398604e0e07448cb94721ec3a43496c/download.pdf. [Accessed 21 Oct 2018].

Materialise, "Keeping Intrion Robots Up to Speed," [Online]. Available: https://www.materialise.com/en/cases/keeping-intrion-robots-up-to-speed. [Accessed 24 Oct 2018].

K. Altaf, A. Majdi Abdul Rani and V. R. Raghavan, "Prototype production and experimental analysis for circular and profiled conformal cooling channels in aluminium filled epoxy injection mould tools," Rapid Prototyping Journal, 2013.

E. Sachs, E. Wylonis, S. Allen, M. Cima and H. Guo, "Production of injection molding tooling with conformal cooling channels using the Three Dimensional Printing process," Polymer Engineering and Science, 2000.

E. GmbH, "Plastic Manufacturer FWB Achieves Major Savings in Production Time and Cost Using Additive Manufacturing," [Online]. Available: https://cdn0.scrvt.com/eos/public/d6021a2d744738ce/d359c096085bce7316bf56d5c9341a4d/fwb.pdf. [Accessed 15 Dec 2018].

G. I. Rozvany, "A critical review of established methods of structural topology optimization," Structural and Multidisciplinary Optimization, 2009.

M. Tomlin and J. Meyer, "Topology optimization of an Additive Layer Manufactured (ALM) aerospace part," in 7th Altair CAE Technology, 2011.

O. Cansizoglu, O. L. Harrysson, H. A. West, D. R. Cormier and T. Mahale, "Applications of structural optimization in direct metal fabrication," Rapid Prototyping Journal, 2008.

"EADS and EOS – Study Demonstrates Savings Potential for DMLS in the Aerospace Industry," 2018. [Online]. Available: https://cdn0.scrvt.com/eos/public/3fb75eeabb786ba7/6bea4ef6e33191ffaf0372fd47e8601a/download.pdf. [Accessed 21 Oct 2018].

B. Vayre, F. Vignat and F. Villeneuve, "Designing for additive manufacturing," in Procedia CIRP, 2012.

G. A. Bingham, R. J. Hague, C. J. Tuck, A. C. Long, J. J. Crookston and M. N. Sherburn, "Rapid manufactured textiles," International Journal of Computer Integrated Manufacturing, 2007.

A. Johnson, G. A. Bingham and D. I. Wimpenny, "Additive manufactured textiles for high-performance stab resistant applications," Rapid Prototyping Journal, 2013.

Y. Chen and C. Zhezheng, "Joint analysis in rapid fabrication of non-assembly mechanisms," Rapid Prototyping Journal, 2011.

F. Calignano, D. Manfredi, E. P. Ambrosio, S. Biamino, M. Pavese and P. Fino, "Direct fabrication of joints based on direct metal laser sintering in aluminum and titanium alloys," in Procedia CIRP, 2014.

"Aalto University Digital Design Laboratory, Nanoshell: Unity," [Online]. Available: http://addlab.aalto.fi/design-research/projects/nanoshell. [Accessed 21 Oct 2018].

R. Stott, "Synthesis Design + Architecture Utilizes Gradient 3-D Printing in Durotaxis Chair. ArchDaily," [Online]. Available: https://www.archdaily.com/610939/synthesis-design-architecture-utilizes-gradient-3-d-printing-in-durotaxis-chair. [Accessed 21 Oct 2018].

"Stratasys, Multi-Material 3D Printing," [Online]. Available: https://www.stratasys.com/polyjet-technology. [Accessed 21 Oct 2018].

M. Vaezi, S. Chianrabutra, B. Mellor and S. Yang, "Multiple material additive manufacturing – Part 1: a review," Virtual and Physical Prototyping, 2013.

N. Oxman, "Variable property rapid prototyping," Virtual and Physical Prototyping, 2011.

A. T. Gaynor, N. A. Meisel, C. B. Williams and J. K. Guest, "Multiple-Material Topology Optimization of Compliant Mechanisms Created Via PolyJet Three-Dimensional Printing," Journal of Manufacturing Science and Engineering, 2014.

M. Y. Wang and X. Wang, ""Color" level sets: A multi-phase method for structural topology optimization with multiple materials," Computer Methods in Applied Mechanics and Engineering, 2004.

J. Corney, R. Becker, A. Grzesiak and A. Henning, Rethink assembly design, 2005.

R. A. Buswell, R. C. Soar, A. G. F. Gibb and A. Thorpe, "Freeform Construction: Mega-scale Rapid Manufacturing for construction," Automation in Construction, 2007.

"FDM Helps Acist Medical Pursue perfection," [Online]. Available: http://usglobalimages.stratasys.com/Case%20Studies/Medical/CS-FDM-Med-AcistMedical-EN-03-15-Web.pdf?v=635708250049307509. [Accessed 20 2018dEC].

E. Lutters, F. J. Van Houten, A. Bernard, E. Mermoz and C. S. Schutte, "Tools and techniques for product design," CIRP Annals - Manufacturing Technology, 2014.

J. Hascoët, R. Ponche, O. Kerbrat and P. Mognol, "From functional specifications to optimized CAD model : proposition of a new DFAM methodology," in Proceedings of the ASME Design Engineering Technical Conferences and Computers and Information in Engineering Conference, 2011.

Y. Zhang, A. Bernard, R. K. Gupta and R. Harik, "Evaluating the design for additive manufacturing: A process planning perspective," in Procedia CIRP, 2014.

P. O’Regan, P. Prickett, R. Setchi, G. Hankins and N. Jones, "Metal Based Additive Layer Manufacturing: Variations, Correlations and Process Control," Procedia Computer Science, vol. 96, pp. 216-224, 2016.

L. G, S. P and S. A. B, "Total Quality Management (TQM) Model for Rapid Manufacturing.," in Rapid Manufacturing Conference, Loughborough, 2006.

M. Schmid and G. Levy, "Quality Management and Estimation of Quality Costs for Additive Manufacturing with SLS," in Direct Digital Manufacturing Conference (Ed.), Direct Digital Manufacturing Conference, 2012.

M. Schmidt, M. Merklein, D. Bourell, D. Dimitrov, T. Hausotte, K. Wegener, L. Overmeyer, F. Vollertsen and G. N. Levy, "Laser based additive manufacturing in industry and academia," CIRP Annals, 2017.

P. O’Regan, P. Prickett, R. Setchi, G. Hankins and N. Jones, "Metal Based Additive Layer Manufacturing: Variations, Correlations and Process Control," Procedia Computer Science, vol. 96, pp. 216-224, 2016.

O. Rehme and C. Emmelmann, "Reproducibility for Properties of Selective Laser Melting Products," in INTERNATIONAL CONFERENCE; 3rd, Lasers in manufacturing; LIM 2005, Munich, 2005.




DOI: http://dx.doi.org/10.21533/pen.v6i2.224

Refbacks

  • There are currently no refbacks.


Copyright (c) 2018 Benjamin Durakovic

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

ISSN: 2303-4521

Digital Object Identifier DOI: 10.21533/pen

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License