Modeling and simulation of a braking energy regeneration system in hydraulic hybrid vehicles in the Colombian topography

Miguel Arlenzo Duran Sarmiento, Luis Alfonso Del Portillo Valdés, Yesid Javier Rueda Ordoñez, Carlos Borrás Pinilla, Diana Carolina Dulcey Diaz

Abstract


In this work presents the modeling and simulation of a braking energy regeneration system in a hydraulic hybrid vehicle. The vehicle used for testing is a 15000 kg heavy duty truck. The proposed regeneration system configured in parallel was subjected to a standard test speed profile such as the NEDC (New European Driving Cycle) and a real speed profile of a delivery vehicle in Colombian territory that was obtained by satellite tracking in order to compare its performance as an alternative in energy saving. A hydraulic circuit has been designed that considers travel characteristics such as track slope and vehicle speed to control hydraulic device displacement and mode of operation (braking and propulsion), as well as the dynamic model of the vehicle. The simulation has been developed in Matlab Simulink. The results of the model simulation are compared according to the torque required by the vehicle, the regenerated torque and the final torque. System performances are also compared with constant and variable displacement hydraulic device based on speed profiles and show a decrease in the torque spikes required in both the fixed and variable displacement of the hydraulic device, these energy savings have been estimated with the calculation of the power consumed based on time and are reflected as a percentage of the total required power. The development of the simulation yielded savings percentages of 15.5% and 22.5% for fixed and variable displacement respectively.

Keywords


Energy; regenerating; braking; consumes; efficiency.

Full Text:

PDF

References


S. A. Sarkodie and V. Strezov, “Effect of foreign direct investments, economic development and energy consumption on greenhouse gas emissions in developing countries,” Sci. Total Environ., vol. 646, pp. 862–871, 2019, doi: 10.1016/j.scitotenv.2018.07.365.

T. R. H. Pearson, S. Brown, L. Murray, and G. Sidman, “Greenhouse gas emissions from tropical forest degradation: An underestimated source,” Carbon Balance Manag., vol. 12, no. 1, 2017, doi: 10.1186/s13021-017-0072-2.

C.-C. Lin, J.-M. Kang, J. W. Grizzle, and H. Peng, “Energy management strategy for a parallel hybrid electric truck,” Am. Control Conf. 2001. Proc. 2001, vol. 4, no. D, pp. 2878–2883 vol.4, 2001, doi: 10.1109/ACC.2001.946337.

Y. Gao, L. Chu, and M. Ehsani, “Design and control principles of hybrid braking system for EV, HEV and FCV,” VPPC 2007 - Proc. 2007 IEEE Veh. Power Propuls. Conf., no. 1, pp. 384–391, 2007, doi: 10.1109/VPPC.2007.4544157.

W. Yu, R. Wang, and R. Zhou, “A comparative research on the energy recovery potential of different vehicle energy regeneration technologies,” Energy Procedia, vol. 158, pp. 2543–2548, 2019, doi: 10.1016/j.egypro.2019.02.001.

X. He et al., “The applications of energy regeneration and conversion technologies based on hydraulic transmission systems: A review,” Energy Convers. Manag., vol. 205, no. November 2019, p. 112413, 2020, doi: 10.1016/j.enconman.2019.112413.

C. Chen, T. Vu, and C. Hung, “A Simulation Study of Power Management for a Series,” 2014, doi: 10.1007/978-3-642-41968-3.

H. Taghavifar and A. Mardani, Studies in Systems, Decision and Control 70 Off-road Vehicle Dynamics Analysis, Modelling and Optimization. 2017.

E. Schaltz, “Electrical Vehicle Design and Modeling,” Electr. Veh. - Model. Simulations, p. 479, 2011.

D. F. Opila, X. Wang, R. B. Gillespie, R. McGee, C. J. a., and J. W. Grizzle, “Real-World Robustness for Hybrid Vehicle Optimal Energy Management Strategies Incorporating Drivability Metrics,” J. Dyn. Syst. Meas. Control, vol. 136, no. November 2014, 2015, doi: 10.1115/1.4027680.

S. Y. - and Z. Z. -, “Critical Parameter Research of Braking Energy Regeneration in Hydraulic Hybrid Power System,” Int. J. Adv. Inf. Sci. Serv. Sci., vol. 4, no. 15, pp. 264–270, 2012, doi: 10.4156/aiss.vol4.issue15.32.

E. R. A. Kumar, “Hydraulic Regenerative Braking System,” Int. J. Sci. Eng. Res., vol. 3, no. 4, pp. 1–12, 2012.

W. Zhao, G. Wu, C. Wang, L. Yu, and Y. Li, “Energy transfer and utilization efficiency of regenerative braking with hybrid energy storage system,” J. Power Sources, vol. 427, no. January, pp. 174–183, 2019, doi: 10.1016/j.jpowsour.2019.04.083.

R. R. S. Bravo, V. J. De Negri, and A. A. M. Oliveira, “Design and analysis of a parallel hydraulic - pneumatic regenerative braking system for heavy-duty hybrid vehicles,” Appl. Energy, vol. 225, no. March 2017, pp. 60–77, 2018, doi: 10.1016/j.apenergy.2018.04.102.

W. Xu, S. Deng, Y. Zhang, D. Zhao, and L. Zhao, “How to give a full play to the advantages of zeotropic working fluids in organic Rankine cycle (ORC),” Energy Procedia, vol. 158, pp. 1591–1597, 2019, doi: 10.1016/j.egypro.2019.01.374.

a. Pourmovahed, N. H. Beachley, and F. J. Fronczak, “Modeling of a Hydraulic Energy Regeneration System: Part II—Experimental Program,” J. Dyn. Syst. Meas. Control, vol. 114, no. 1, p. 160, 1992, doi: 10.1115/1.2896498.

T. H. Ho and K. K. Ahn, “Modeling and simulation of hydrostatic transmission system with energy regeneration using hydraulic accumulator,” J. Mech. Sci. Technol., vol. 24, no. 5, pp. 1163–1175, 2010, doi: 10.1007/s12206-010-0313-8.

S. Hui, Y. Lifu, and J. Junqing, “Hydraulic/electric synergy system (HESS) design for heavy hybrid vehicles,” Energy, vol. 35, no. 12, pp. 5328–5335, 2010, doi: 10.1016/j.energy.2010.07.027.

S. Hui and J. Junqing, “Research on the system configuration and energy control strategy for parallel hydraulic hybrid loader,” Autom. Constr., vol. 19, no. 2, pp. 213–220, 2010, doi: 10.1016/j.autcon.2009.10.006.

T. Liu, J. Jiang, and H. Sun, “Investigation to Simulation of Regenerative Braking for Parallel Hydraulic Hybrid Vehicles,” 2009 Int. Conf. Meas. Technol. Mechatronics Autom., pp. 242–245, 2009, doi: 10.1109/ICMTMA.2009.418.

Z. Man, F. Ding, C. Ding, and S. Liu, “Study of an Energy Regeneration System with Accumulator for Hydraulic Impulse Testing Equipment,” Strojniški Vestn. – J. Mech. Eng., vol. 61, no. 3, pp. 196–206, 2015, doi: 10.5545/sv-jme.2014.2138.

A. Pourmovahed, N. H. Beachley, and F. J. Fronczak, “Modeling of a Hydraulic Energy Regeneration System- Part I : Analytical Treatment,” vol. 114, no. March 1992, pp. 155–159, 2016.

J. Taylor, W. Rampen, A. Robertson, and N. Caldwell, “Digital displacement hydraulic hybrids.Parallel hybrid drives for commercial vehicles.,” no. 1, 2011.

S. Zhou, P. Walker, and N. Zhang, “Parametric design and regenerative braking control of a parallel hydraulic hybrid vehicle,” Mech. Mach. Theory, vol. 146, p. 103714, 2020, doi: 10.1016/j.mechmachtheory.2019.103714.




DOI: http://dx.doi.org/10.21533/pen.v9i4.1986

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 Miguel Arlenzo Duran Sarmiento, Luis Alfonso Del Portillo Valdés, Yesid Javier Rueda Ordoñez, Carlos Borrás Pinilla, Diana Carolina Dulcey Diaz

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

ISSN: 2303-4521

Digital Object Identifier DOI: 10.21533/pen

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License