Review of methods for prediction of internal blast loading
Abstract
Keywords
Full Text:
PDFReferences
P. D. Smith, J. G. Hetherington, Blast and Ballistic Loading of Structures, Butterworth-Heinemann 1994.
D. Cormie, G. Mays, P. Smith, Blast effects on buildings, Second Ed., Thomas Telford Publications, 2009.
W. Baker, P. Cox, P. Westine, J. Kulesz, R. Strehlow, Explosion Hazards and Evaluation. Elsevier, 1983.
UFC 3-340-02, Structures To Resist The Effects Of Accidental Explosions, Technical manual, Dec. 2008.
S. G. A. Bergman, "Swedish protective structures for manufacturing units constituting explosion hazard in the range 1-2000lbs TNT", Annals of the New York Academy of Sciences, Vol. 152, Art. 1, pp. 500-9 (1968).
UFC 3-340-02, Structures To Resist The Effects Of Accidental Explosions, Technical manual, Dec. 2008.
F. H. Gregory, "Analysis of the Loading and Response of a Suppressive Shield When Subjected to an Internal Explosion", Minutes of the 17th Explosive Safety Seminar, Denver, Colorado, September 1976.
C. N. Kingery, R. N. Schumacher, and W. O. Ewing, "Internal Pressures from Explosions i n Suppressive Structures", BRL Interim Memorandum Report No. 603, Aberdeen Proving Ground, MD, June 1975.
R. N. Schumacher, C. N. Kingery, W. O. Ewing, "Air Blast and Structural Response Testing of a 1/4 Scale Category I Suppressive Shield", BRL Memorandum Report No. 2623, May 1976.
V. Feldgun, Y. Karinski, I. Edri, D.Tsemakh and D. Yankelevsky, "On Blast Pressure Analysis Due to a Partially Confined Explosion: I - Experimental Studies", International Journal of Protective Structures, 2(1), 1 - 20, 2011.
V. Feldgun, Y. Karinski, D. Yankelevsky, "Some characteristics of an interior explosion within a room without venting", Structural Engineering and Mechanics, Vol. 38, No. 5 (2011) 633-649, 2011.
ANSYS AUTODYN Training manual, ANSYS Inc. 2009.
DOI: http://dx.doi.org/10.21533/pen.v9i2.1712
Refbacks
- There are currently no refbacks.
Copyright (c) 2021 Authors
This work is licensed under a Creative Commons Attribution 4.0 International License.
ISSN: 2303-4521
Digital Object Identifier DOI: 10.21533/pen
This work is licensed under a Creative Commons Attribution 4.0 International License