Ballistic impact performance of laminated composite structures

Fehim Findik, Erdal Camcı

Abstract


Recently published research indicates that laminated composites have limited applications in advanced structural systems due to their low impact performance. This review paper is focused on the impact resistance and penetration behavior of composites reinforced with fibers as well as their suitability for modern structural applications. The historical development of composite laminates is first reviewed in detail, and notable researchers and their contributions are then reviewed. Also included are reviews on published experimental, numerical, and analytical work on the low velocity impact of composite laminates. Relevant results will be discussed and the recommendations that need to be resolved in the future will be addressed.

Keywords


Low velocity impact; Laminates; Impact behavior; Ballistic test; Mechanical properties; Failure analysis

Full Text:

PDF

References


Kalay YE. Low velocity impact characterization of monolithic and laminated a 2024 plates by drop weight test. MSc thesis, METU, 2003.

Tarim N, Findik F, Uzun, H. Ballistic Impact Performance of Composite Structures. Composite Structures 2002;56(1):13-20.

Findik F, Tarim N. Ballistic impact efficiency of polymer composites. Composite Structures 2003;61(3):187-192.

Guocai Wu JMY. The mechanical behavior of GLARE laminates for aircraft structures. JOM 2005;72–9.

Vlot A. Impact properties of fiber metal laminates. Compos Eng 1993;3:911–27.

Vlot A. Impact loading on fiber metal laminates. Int J Impact Eng 1996;18:291–307.

Ubeyli M, Yıldırım RO, Ogel B. Investigation on the ballistic behavior of Al2O3/Al2024 laminated composites. J of Materials Processing Technology 2008;196:356–364.

Özşahin E. Behavior of Al sheets under high impacted loads. PhD thesis, ITU, 2008.

Özşahin E, Tolun S. Effect of layer arrangement on ballistic strength in polyethylene reinforced AA 7075 T651 plates. ITU Magazine, 2009;8(2):72-80.

Medvedovski E. Ballistic performance of armor ceramics: Influence of design and structure Part 1. Ceramics International 2010;36:2103–2115.

Medvedovski E. Ballistic performance of armor ceramics: Influence of design and structure. Part 2. Ceramics International 2010;36:2117–2127.

Ubeyli M, Yıldırım RO, Ogel B. On the comparison of the ballistic performance of steel and laminated composite armors. Materials and Design 2007;28:1257–1262.

Kılıc N, Bedir S, Erdik A, Ekici B, Tasdemirci A, Guden M. Ballistic behavior of high hardness perforated armor plates against 7.62 mm armor piercing projectile. Materials and Design 2014;63:427–438.

Jena PK, Ramanjeneyulu K, Kumar KS, Bhat TB. Ballistic studies on layered structures. Materials and Design 2009;30:1922–1929.

Borvik T, Langseth M, Hopperstad OS, Malo KA. Ballistic penetration of steel plates. Int. Journal of Impact Engineering 1999;22:855-886.

Yunfei D, Wei Z, Yonggang Y, Lizhong S, Gang W. Experimental investigation on the ballistic performance of double layered plates subjected to impact by projectile of high strength. Int. Journal of Impact Engineering 2014;70:38-49.

Davis NV, Gao XL, Zheng JQ. Ballistic Resistant Body Armor: Contemporary and Prospective Materials and Related Protection Mechanisms. Applied Mechanics Reviews 2009;61:1-19.

Chai GB, Manikandan P. Low velocity impact response of fiber-metal laminates – A review. Composite Structures 2014;107:363–381.

Bandaru AK, Chavan VV, Ahmad S, Alagirusamy R, Bhatnagar N. Ballistic impact response of Kevlar® reinforced thermoplastic composite armors. Int. Journal of Impact Engineering 2016;89:1–13.

Ozgultekin SE. Investigation of composite material combinations used in ballistic arms. MSc Thesis, SAU, 2012.

Santiago R, Cantwell W, Alves M. Impact on thermoplastic fibre-metal laminates: Experimental observations. Composite Structures 2017;159:800–817.

Safri SNA, Sultan MTH, Jawaid M, Jayakrishna K. Impact behavior of hybrid composites for structural applications. Composites Part B 2018;133:112-121.

Sadighi M, Alderliesten RC, Benedictus R. Impact resistance of fiber-metal laminates. Int. Journal of Impact Engineering 2012;49:77-90.

Pandya KS, Naik NK. Analytical and experimental studies on ballistic impact behavior of carbon nanotube dispersed resin. Int. Journal of Impact Engineering 2015;76:49-59.

Zukas JA, Nicholas T, Swift HF, Greszczuk LB, Curran D. Impact Dynamics. pp. 155-214, John Wiley & Sons Inc, 1982.

Lambert JP, Ringers BE. Ballistic Research Laboratory. ARBRL-TR-02066, 1978.

Dieter GE. Mechanical Metallurgy. McGraw-Hill Inc, 1988.

ASTM Standards, pt. 31, pp. 582-601, Designation E208-69, 1969.

Çolakoğlu A. Design and Construction of a Gravity Drop Hammer. MSc Thesis, Mechanical Engineering Department, METU, 2002.

Iyibilgin O. Use of CAD/CAE for impact and penetration analysis. PhD thesis, Sakarya University, 2004.

HP White Laboratory. Sharp Instrument Penetration of Body Armor Inc. Test Procedures. HPW-TP-0400.03, 1994.

Bandaru AK, Chavan VV, Ahmad S, Alagirusamy R, Bhatnagar N. Ballistic impact response of Kevlar® reinforced thermoplastic composite armors. Int Journal of Impact Engineering 2016;89:1–13.

Davies GAO, Zhang X, Zhou G, Watson S. Numerical modeling of impact damage. Composites 1994;25:342-50.

Zhang X. Impact damage in composite aircraft structures- experimental testing and numerical simulation, ImechE, Part G. J Aerospace Eng 1998;212:245-59.

Flores-Johnson EA, Saleh M, Edwards L. Ballistic performance of multi-layered metallic plates impacted by a 7.62-mm APM2 projectile. Int Journal of Impact Engineering 2011;38: 1022-1032.

Pandya KS, Naik NK. Analytical and experimental studies on ballistic impact behavior of carbon nanotube dispersed resin. Int Journal of Impact Engineering 2015;76:49-59.

Torshizi SEM, Dariushi S, Sadighi M, Safarpour P. A study on tensile properties of a novel fiber metal laminates. Mater Sci Eng A 2010;527:4920-5.

Linde P, Pleitner J, de Boer H, Carmone C. Modeling and simulation of fiber metal laminates. In: ABAQUS Users’ Conference, Boston, Massachusetts, 2004. p. 421-439.

Alderliesten R. On the development of hybrid material concepts for aircraft structures. Recent Patents on Engineering 2009;3:25-38.

Villanueva GR, Cantwell WJ. The high velocity impact response of composites and FML-reinforced sandwich structures. Composites Sci Technol 2004;64:35-54.




DOI: http://dx.doi.org/10.21533/pen.v7i3.700

Refbacks

  • There are currently no refbacks.


Copyright (c) 2019 Fehim Findik

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

ISSN: 2303-4521

Digital Object Identifier DOI: 10.21533/pen

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License