Contribution to the quality improvement of manganese steel Z120 MC12
Abstract
Keywords
Full Text:
PDFReferences
Austenitic cast steels with high levels of manganese. CTIF Brief, BDT No. 37, March (1971).
Allahkaram, S.R. 2007. Causes of catastrophic failure of high Mn steel utilized as crusher overlaying shields. JE TRANSACTIONS B: Applications Vol. 21, No. 1 (April 2008) 55- 64
Allain, S., J.P. Chateau, O. Bouaziz, M. Legros and X. Garat. 2002. Characterization of the mechanical twinning microstructure in a high manganese content austenitic steel, 75- 78.In: Proceedings of the International Conference on TRIP-Aided High Strength Ferrous
Alloys, Ghent, Belgium, Aachen:; 2002
Aymard, J.-P. and M-T. Leger. 1996 Manual of molded steels, CETIF - Editions Techniques des Industries de la Fonderie, 364 pages, hardcover, French, 1996.
Bhero, S.W., B. Nyembe andK. Lentsoana 2014. Common failure of Hadfield steel in application. International Conference on Mining, Mineral Processing and Metallurgical Engineering (ICMMME'2014) April 15-16, 2014 Johannesburg (South Africa).
Bouaziz O., S. Allain and C. Scott. 2008. Effect of grain and twin boundaries on the hardening mechanisms of twinning-induced plasticity steels. Scripta Materialia 58-6, pp. 484-487
Fondeur Today's Foundry, No. 198. 1968. Austenitic Steel Materials, 12% Manganese, pp. 15-17.
Leger, M.T. 1990. Qualité totale en traitement thermique. ATTT, PYC Editions, 185 pages Lindqvist, M. and C.M. Evertsson. 2006. Development of wear model for cone crushers. Volume 261, issues 3-4 pages 435-442.
Norme AFNOR standard, NF A 32-058. 2002 Abrasion Resistant Cast Steel and Cast Iron, 32 Pages
Subramanyam, D.K. 1995. Austenitic manganese steel. Metals Handbook 10th Edition, Volume 1,
Properties and selection: Stainless steels, tool materials and special purpose metals, ASM International.
Tęcza, G. and S. Sobula. 2016. Effect of heat treatment on change microstructure of cast high
manganese Hadfield steel with elevated chromium content. Archives of Foundry Engineering 23 avr:
vol. 16 iss. 4, s. 163–168
Yu.V. Trofimenko, V.I. Komkov and V.V. Donchenko, T.D. Potapchenko, "Model for the assessment
greenhouse gas emissions from road transport," Periodicals of Engineering and Natural Sciences, ISSN
-4521, vol. 7, No. 1, pp. 465-473, June 2019.
] Dileep bp, Vitala H R. Mechanical and Tribological Characterization Nitrided Al-7075/Al2O3 Metal Matrix Composites. Periodicals of Engineering and Natural Scinces. Vol.6, No.2, October 2018, pp.
~70.
Andrey Dunin, Mikhail Shatrov, Valerii Malchuk, Sergei Skorodelov, Vladimir Sinyavski, Andrey
Yakovenko. Simulation of fuel injection through a nozzle having different position of the spray holes.
Periodicals of Engineering and Natural Scinces. Vol. 7, No. 1, June 2019, pp.458-46
DOI: http://dx.doi.org/10.21533/pen.v6i2.551
Refbacks
- There are currently no refbacks.
Copyright (c) 2019 Abdellah ZAMMA
This work is licensed under a Creative Commons Attribution 4.0 International License.
ISSN: 2303-4521
Digital Object Identifier DOI: 10.21533/pen
This work is licensed under a Creative Commons Attribution 4.0 International License