Simulation of fuel injection through a nozzle having different position of the spray holes

Andrey Dunin, Mikhail Shatrov, Valerii Malchuk, Sergei Skorodelov, Vladimir Sinyavski, Andrey Yakovenko

Abstract


In the article, a method of hydraulic calculation of working process of a diesel fuel feed system having a nozzle with different positions of its spray holes was investigated. A research of diesel engine injector nozzle design which had two groups of holes was carried out. Entering edges of the first group with the coefficient of flow μhl were located in the sack volume and entering edges of the second group (coefficient of flow μhu) – on the locking taper surface of the nozzle body. The coefficients of flow μhl and μhu differ considerably and depend on the valve needle position. This enables to distribute rationally the injection quantity by injection holes taking into account operating conditions of the diesel engine and hence – by the combustion chamber zones.

Keywords


Diesel fuel system, Nozzle with different Positions of the spray holes, Injection characteristics, Fuel feed system simulation

Full Text:

PDF

References


N. S. Alekhin, I. N. Kurzel', V. I. Mal'chuk, A. A. Mukharski, V. I. Trusov, M. K. Skudnov, Patent 922302 SSSR MKI F02M 23/06, 23.04.1982.

I. V. Astakhov, L. N. Golubkov, V. I. Trusov, A. S. Khachiian, L. M. Riabkin, "Fuel systems and efficiency of diesels," Mashinostroenie, Moscow, 1990, 288 p.

V. I. Malchuk, "Fuel injection and zonal mixture formation," MADI, Moscow, 2009, 176 p.

V. I. Malchuk, S. D. Skorodelov, "Hydraulic calculation of diesel nozzles, wherein the location of the spray holes," Vestnik MADI, 2013, no 4 (35), pp. 31-37.

B. B. Nekrasov, "Hydraulics," Mashinostroenie, Moscow, 1969, 264 p.

M. G. Shatrov, L. N. Golubkov, A. U. Dunin, P. V. Dushkin, A. L. Yakovenko, "The new generation of common rail fuel injection system for Russian locomotive diesel engines," Pollution Research, Volume 36 (3), 2017, pp. 678-684.

M. G. Shatrov, L. N. Golubkov, A. U. Dunin, A. L. Yakovenko, P. V. Dushkin, "Influence of high injection pressure on fuel injection perfomances and diesel engine worcking process," Thermal Science, Volume 19, Number 6, 2015, pp. 2245-2253.

M. G. Shatrov, L. N. Golubkov, A. U. Dunin, A. L. Yakovenko, P. V. Dushkin, "Research of the impact of injection pressure 2000 bar and more on diesel engine parameters," International Journal of Applied Research, Volume 10, Number 20, 2015, pp. 41098-41102.

M. G. Shatrov, L. N. Golubkov, A. U. Dunin, A. L. Yakovenko, P. V. Dushkin, "Experimental research of hydrodynamic effects in common rail fuel system in case of multiple injection," International Journal of Applied Engineering Research, Volume 11, Number 10, 2016, pp. 6949-6953.

M. G. Shatrov, L. N. Golubkov, A. Yu. Dunin, P. V. Dushkin, A. L. Yakovenko, "A method of control of injection rate shape by acting upon electromagnetic control valve of common rail injector," International Journal of Mechanical Engineering and Technology, Volume 8, Issue 11, 2017, pp. 676-690.

M. G. Shatrov, V. I. Malchuk, A. U. Dunin, A. L. Yakovenko, "The influence of location of input edges of injection holes on hydraulic characteristics of injector the diesel fuel system," International Journal of Applied Engineering Research, Volume 11, Number 20, 2016, pp. 10267-10273.

M. G. Shatrov, V. I. Malchuk, A. Y. Dunin, I. G. Shishlov, V. V. Sinyavski, "A control method of fuel distribution by combustion chamber zones and its dependence on injection conditions," Thermal Science, Volume 22, Number 5, 2018, pp 1425-1434.

M. G. Shatrov, V. V. Sinyavski, A. Y. Dunin, I. G. Shishlov, A. V. Vakulenko, "Method of conversion of high- and middle-speed diesel engines into gas diesel engines," Facta Universitatis. Series: Mechanical Engineering, Vol. 15, No 3, 2017, pp. 383-395.

M. G. Shatrov, V. V. Sinyavski, A. Y. Dunin, I. G. Shishlov, A. V. Vakulenko, A. L. Yakovenko, "Using simulation for development of the systems of automobile gas diesel engine and its operation control," International Journal of Engineering and Technology, №7 (2.28), 2018, pp. 288-295.

V. V. Sinyavski, I. V. Alekseev, I. Y. Ivanov, S. N. Bogdanov, Y. V. Trofimenko, "Physical simulation of high- and medium-speed engines powered by natural gas," Pollution Research, Vol. 36 (3), 2017, pp. 684-690.




DOI: http://dx.doi.org/10.21533/pen.v7i1.403

Refbacks

  • There are currently no refbacks.


Copyright (c) 2019 Andrey Dunin

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

ISSN: 2303-4521

Digital Object Identifier DOI: 10.21533/pen

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License