The behavior of sandy soils under different types of loading

Reem Siham Tawfeeq, Bilal Muiassar M. Salih

Abstract


The method of reinforcement soil layers was a common technique to improve the ability of the soil to retain load and reduce settlement. The technique has been somewhat dependent, whereas, in the past, there was research on this method of design and analysis. So, soil improvement by reinforcing it must be analyzed correctly. The capacity of assuming the improved bearing capacity underground of reinforced sand was investigated through the user's use of the test executor in diverse test cases. Here in this investigation, four various kinds of reinforcement materials have been used. Four circular models with different interior diameters were used to examine the effect of the circular ratio on the bearing capacity of the soil layer along the various reinforcing state of affairs. A typical plate load test was carried out with the presence of monotonous and periodic loading in three chains mentioned in tests of the monochrome plate loading on ringing base anchoring on layers of sand which are reinforced over Netlon CE121 Geo-grid as a material of reinforcement- 15 numbers, tests of periodic plate-load PLT along Geogrid (Netlon CE121) as materials of reinforcing - 15 number, the Monochromatic tests of plate-load over Geojute as a reinforcing material - 9 number, tests of periodic plate-load PLT over Geojute as a reinforcing material - 9 number.

Full Text:

PDF


DOI: http://dx.doi.org/10.21533/pen.v11i2.3549

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Reem Siham Tawfeeq, Bilal Muiassar M. Salih

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

ISSN: 2303-4521

Digital Object Identifier DOI: 10.21533/pen

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License