Creation of principles for the implementation of operating systems for high-precision fire equipment

Ilya V. Samarin, Aleksey V. Kruchkov, Andrey Yu. Strogonov


The use of fire extinguishing software is based on the principles of system analysis, when any software is created for specific tasks or adapted to use on existing equipment samples. Therewith, a considerable part of the software cannot be implemented in conditions when the operation of technical means is autonomous or specialised. This includes devices of increased accuracy with the requirement to receive a response with a minimum delay. The originality of the study is conditioned by the fact that the principles of creating software for situations with minimal response require its consolidation with equipment that works on the principles of microcode. Based on the analysis of the current state of analogue-to-digital and functional conversion methods, it is shown that a promising area of research and improvement is the creation of converters on switched capacitors that combine the functions of ATFC, and also have an increased number of input values with high accuracy and speed. The methodological basis for creating new methods for constructing ATFC is a combination of structural and algorithmic principles for improving the accuracy of analogue-to-digital conversion based on the properties of capacitor cells. The practical significance of the study is determined by the possibilities of using hardware microcode as modules for the main software set.


Fire hazard; Reference voltage; Instrument manufacture; Tactile pulse; Microcode

Full Text:



D. M. Gillard, T. Cameron, A. Prochazka, and M. J. A. Gauthier, “Tremor suppression using functional electrical stimulation: A comparison between digital and analog controllers”, IEEE Transactions on Rehabilitation Engineering, vol. 7, no. 3, pp. 385–388, 1999.

W. M. Zuberek, “Mixed-mode simulation with SPICE-like circuit simulators”, Conference Record – Asilomar Conference on Circuits, Systems & Computers, vol. 1, pp. 445–449, 1989.

V. S. Moiseev, A. A. Tuchkov, and S. M. Kozmenko, “OPTAN System for Automated Design of Analog/Digital Converters”, Izvestia Vyssih Ucebnyh Zavedenij. Priborostroenie, vol. 23, no. 1, pp. 54–58, 1980.

H. Du, L. Liu, Y. Gao, and Q. Gong, “Radio Frequency System-On-Chip Design for Digital Receiver” (pp. 353–356), in: 2018 IEEE 3rd International Conference on Integrated Circuits and Microsystems, ICICM 2018. Retrieved from:

L. Serra, M. Cercignani, C. Mastropasqua, M. Torso, B. Spanò, E. Makovac, and M. Bozzali, “Longitudinal changes in functional brain connectivity predicts conversion to Alzheimer’s disease”, Journal of Alzheimer’s Disease, vol. 51, no. 2, pp. 377–389, 2016.

S. I. Malafeev, “Analog-digital devices for controlling thyristors”, Elektrotekhnika, vol. 1, pp. 50–53, 1995.

R. Hnilica, M. Ťavodová, M. Hnilicová, J. Matej, and V. Messingerová, “The innovative design of the fire-fighting adapter for forest machinery”, Forests, vol. 11, no. 8, article number 843, 2020.

S. M. Pankaj, and G. V. Ashutosh, “Analysis of fire hazard in healthcare buildings through media elicitation”, Disaster Advances, vol. 13, no. 7, pp. 53-57, 2020.

A. Velychko, D. Velychko, S. Velychko, A. Vichkan, A. Klyueva, and K. Netrebenko, “Simulation of superhet retransmitting meter with analog-digital signal processing”, Eastern-European Journal of Enterprise Technologies, vol. 2, no. 9, pp. 46–52, 2015.

O. Guschina, “Refining time delay estimate of complex signal using polynomial interpolation in time domain”, in: Conference Proceedings “2021 Systems of Signals Generating and Processing in the Field of on-Board Communications”, article number 9416076. Moscow: Institute of Electrical and Electronics Engineers Inc, 2021. DOI: 10.1109/IEEECONF51389.2021.941607

M. Min, T. Parve, and A. Ronk, “Design concepts of instruments for vector parameter identification” (pp. 347–352), in: Conference Record – IEEE Instrumentation and Measurement Technology Conference, 1991. Retrieved from:

A. M. Melik-Shakhnazarov, V. V. Savin, and Y. A. Dadayan, “Functional Integrating Analog/Digital Converter”, Izvestia Vyssih Ucebnyh Zavedenij. Priborostroenie, vol. 23, no. 3, pp. 34–37, 1980.

A. Y. Burova, and T. O. Usatenko, “Digital algorithms for the discrete frequency selection of signals that do not use algorithmic multiplication operations”, TEM Journal, vol. 9, no. 2, pp. 501–506, 2020. DOI: 10.18421/TEM92-1

A. Burova, “Reducing the error of digital algorithms for deductive signal processing based on their multi-stage discrete Fourier transform by the difference digital filters”, in: Proceedings of the 2020 22th International Conference on Digital Signal Processing and its Applications, DSPA 2020, article number 9213275. Moscow: Institute of Electrical and Electronics Engineers Inc, 2020. DOI: 10.1109/DSPA48919.2020.9213275

N. C. Horta, and J. E. Franca, “Algorithm-Driven synthesis of data conversion architectures”, IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems, vol. 16, no. 10, pp. 1116–1135, 1997.

Z. Tang, Y. J. Liu, J. P. Yuan, and Z. Fang, “Study of the critical velocity in tunnels with longitudinal ventilation and spray systems”, Fire Safety Journal, vol. 90, pp.139-147, 2017.

A. V. Ryapukhin, V. V. Kabakov, and R. N. Zaripov, “Risk management of multimodular multi-agent system for creating science-intensive high-tech products”, Espacios, vol. 40, no. 34, p. 19, 2019.

U. Ehrnstén, L. Carpén, and K. Tompuri, “Microbially induced corrosion in firefighting systems – Experience and remedies”, Minerals, Metals and Materials Series, vol. F11, pp. 831-840, 2018.

S. Jiang, D. Feng, C. Lu, J. Li, and H. Chai, “Research on the construction of the spiral evolutionary design methodology for a product service system based on existing products”, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, vol. 234, no. 4, pp. 825-839, 2020.

M. N. Erofeev, V. V. Spiryagin, D. A. Pankin, A. I. Chmykhalo, E. A. Lesyuk, and A. V. Chelnokov, “Protection against corrosion and restoration of heat exchanger surfaces during repair and operation”, Journal of Machinery Manufacture and Reliability, vol. 49, no. 10, pp. 878-883. 2020. DOI: 10.3103/S1052618820100052

A. Tarasenko, P. Chepur, and A. Gruchenkova, “Assessment of the subsurface fire-fighting system pipeline impact on the tank stress state during the foundation settlement”, Advances in Intelligent Systems and Computing, vol. 692, pp. 936-943, 2018.

A. Iwata, M. Nagata, N. Takeda, M. Homma, and T. Morie, “Pulse modulation circuit architecture and its application to functional image sensors”, Proceedings – IEEE International Symposium on Circuits and Systems, vol. 2, pp. II-301-II–304, 2000.

T. Ya. Shevgunov, “The development of fast algorithm for continuous-time subsectional polynomial E-pulse synthesis”, TEM Journal, vol. 9, no. 3, pp. 881‐888, 2020. DOI: 10.18421/TEM93-07

O. D. Azarov, M. R. Obertyukh, P. Panas, P. Kisała, G. Kashaganova, and S. Amirgaliyeva, “Analogue part of multichannel highly productive analog-digital system on converters and switches of current”, Przeglad Elektrotechniczny, vol. 95, no. 4, pp. 116–120, 2019.

T. Kravchenko, T. Shevgunov, and A. Petrakov, “On the development of an expert decision support system based on the electre methods”, in: Proceedings of the 9th Computer Science On-line Conference (CSOC 2020). Advances in Intelligent Systems and Computing, vol. 1226, pp. 552-561. Zlin: Springer, 2020. DOI: 10.1007/978-3-030-51974-2_51

M. Sugita, “Functional analysis of chemical systems in vivo using a logical circuit equivalent. V. Molecular biological interpretation of the self-reproducing automata theory and chemico-physical interpretation of information in biological systems”, Journal of Theoretical Biology, vol. 53, no. 1, pp. 223–237, 1975.

M. I. Gordeeva, “Methods for forecasting and control of the phase composition and residual voltage in Al-Cu-Li alloys in friction mixing welding”, in: Proceedings of the 17th International Scientific and Technical Conference Rapid Solidification Materials and Coatings (RSMC 2020), Journal of Physics: Conference Series, vol. 1713, no. 1, article number 012017. Moscow, IOP Publishing Ltd, 2020. DOI: 10.1088/1742-6596/1713/1/012017

V. M. Trokhin, and V. I. Chuprun, “Analog-digital servo system”, Instruments and Experimental Techniques, vol. 32, no. 2/1, pp. 376–378, 1989.

D. Plant, “How to navigate analog/digital gulf”, Electronic Engineering Times, vol. 1377, article number 52, 2005.

N. V. Britvin, and E. O. Karpukhin, “The linear network coding optimization in hybrid ARQ/FEC system to counteract head-of-line blocking in queue”, in: Proceedings of the 2nd International Scientific Conference on Metrological Support of Innovative Technologies (ICMSIT 2020), Journal of Physics: Conference Series, vol. 1515, no. 3, article number 032019. Krasnoyarsk, Institute of Physics Publishing, 2020. DOI: 10.1088/1742-6596/1515/3/032019

P. Holz, and A. Brandenburg, “Fluorescence laser scanner for in-line inspection of functional coatings in metal processing industries”, Proceedings of SPIE – The International Society for Optical Engineering, vol. 11056, article number 110561X, 2019.

N. Kostin, O. Sheikina, and V. Artemchuk, “Mathematical modeling of non-linear electrochemical circuits with pulse sources of voltage”, Przeglad Elektrotechniczny, vol. 81, no. 2, pp. 57-60, 2005.



  • There are currently no refbacks.

Copyright (c) 2021 Ilya V. Samarin, Aleksey V. Kruchkov, Andrey Yu. Strogonov

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License.

ISSN: 2303-4521

Digital Object Identifier DOI: 10.21533/pen

Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 International License